Government rappelers to the rescue…..

A massive piece of rock is at risk of crashing down from a canyon wall to the base of an Arizona dam, prompting the government to send in a crew of rappelers to keep the slab in place.

The 500,000-pound slab — weighing more than many jumbo jets — began to break away from the canyon wall last week in what the U.S. Bureau of Reclamation attributes to erosion that is typical for that type of rock. The area below the slab includes a passageway to a boat ramp, a machine shop and water and power facilities for the Glen Canyon Dam, located in Page near the Arizona-Utah border.

The Bureau of Reclamation has cut off access to the boat ramp, putting some rafting trips on hold until the rock can be secured.

A three-person crew has been scaling the towering walls to drill bolts that range from 6 feet to 8 feet into the sandstone. Six bolts were placed in the canyon wall a week ago before a small chunk broke loose and crashed to the ground, hitting a building and leaving a pile of rubble, Bureau of Reclamation spokesman Chris Watt said.

“It’s just plain luck that it didn’t cause more damage because we don’t know how big of chunks are going to fall,” he said. “If more of it falls, that’s a real concern.”

The slab measures 30 feet at its widest point and is 50 feet tall. Its thickness ranges from six inches to 4 feet, he said.

The plan is to attach bolts in the area above the crack to make sure it’s safe enough for crews to then work on the slab that is in jeopardy of falling. Temperatures can top 110 degrees on the face of the wall, limiting the hours the crew can work, Watt said. The work isn’t expected to be complete until the first week of October.

The slab is about 150 feet away from the edge of the dam, which is not in danger of being hit by the rock. Watt also said the location is at constant risk of falling rock, and engineers have constructed protections at the site such as stronger buildings and an area designed to catch falling rock.